Filter
Top Products
• SETUP (Alternate to the EXIT)
When the SETUP key is pressed in the offline mode, the printer enters the
setup options. The setup options are explained later in the "Basic setup
options".
In the setup options, this key is used as the EXIT key. When the key is
pressed in the setup options, the printer exits from the setup options and
enters the offline mode.
• BIN (Alternate to the ENTER)
This key is for selecting the active paper tray of the cut sheet feeder or the
paper feed method: BIN 1, BIN 2, BIN 1+2, or MANUAL. BIN 1, BIN 2, or
BIN 1+2 appears only when the cut sheet feeder (CSF) option is set. To
register, select and hold the key for one second.
Note
The paper select lever must be switched according to the selection.
In the setup options, this key is used as the ENTER key. When the key is
pressed in the setup options, the current selection in the setup options will
register to the printer.
• OTHERS
The ←, →, ↓, ↑ and ENTER keys become effective only in the setup options entered by
pressing the SETUP key. For more information refer to "Basic setup options"
❏ Control Levers
• Paper Select Lever
The paper select lever serves to switch between the fanfold continuous paper
setting and the single sheet paper setting (or CSF setting when CSF is
installed).
•
Head adjustment Lever
This lever adjusts the gap between the print head and platen. The correct
gap adjustment for a different paper thickness is required to obtain optimum
print quality. See also page 15.
PARK
TOF SET
ENTER
SETUP
M.RLF
LF
M.LF
FF
TEAR
OFFRLF ON LINE
P
.OUT
ON
LINE
POWER
EXIT
BIN
L C D
RESET
SETUP
EXIT
ENTER
BIN
19
3. Control panel and operations