Filter
Top Products
❏ Cleaning
Minimum periodical cleaning will ensure the maximum performance from your printer. Do not
spill or splash a cleaning liquid inside the printer. Please refer to the "Printer cover removal"
on page 59 to remove the covers for cleaning.
Before cleaning the printer, be sure to turn off the power and disconnect the
power cord. (When cleaning the platen, power may be required.)
Inside the printer
Thoroughly vacuum these area.
Remove any collected paper dust and particles.
Exterior Casings
Clean with a soft cloth dampened
with a mild detergent.
FPC cable plastic binder
Make sure that the binder clamps the cable securely.
Platen
Inside the printer
Exterior Casing
◆ Use a platen cleaner, or any weak alcohol solvents, to remove any
ink from the platen and bail rollers. Do not apply any other liquid
chemical to the platen.
Note
Even with a specified platen cleaner, frequent use of the liquid is
not recommended. Apply only when it is necessary.
◆ Use a vacuum cleaner to remove paper dust and particles from
inside the printer. A small brush is suitable for removing paper
dust from hard-to-get-at areas.
◆ Clean with a soft cloth dampened with a mild detergent. Never
use organic solvents such as alcohol or thinner.
Note
58
8. Maintenance
8. Maintenance