Filter
Top Products
84
❏ Setup options control codes
This command is specially designed to assist you in utilizing the printer to its fullest
potential. Most of printer's setup options can be accessed and changed through the
following command sequence.
Setup command sequence
Setup declare codes
(1B 7C 60 01 00 11)h
Setup command codes
1B 7C 60 m1 m2
a1...ak
header
m1,m2:Number of data bytes
followed as parameters
(a1..ak). k = (m1 +
(
256 x m2))
Setup terminate codes
(1B 7C 60 01 00 12)h
1. This command sequence is only valid when the Software setup is set to YES
(enabled) in the extended setup options at the front control panel. The
command is treated as regular print data if the software setup is disabled.
2. Always start the software setup commands with the setup declare code and end
by the setup terminate code.
3. In order to store the parameters changed in the setup options through these
control codes, be sure to insert the "Save setup" function code before the setup
terminate codes.
Notes
B. Control code summary (Setup options)