Filter
Top Products
Autoscroll mode
The Autoscroll function automatically advances the paper to the tear off position when no data
exists in the communication buffer and no new data is received for a period of 1 second.
This feature is very beneficial when it is necessary to print a single invoice, and tear it off
immediately following printing.
In the case of "TOF ONLY" : Auto scroll is performed only when the present position, after the
printing, is at TOF.
In the case of "ANY POS" : Autoscroll is performed at any position after the printing if the
perforation is between the paper cutter and the print head.
i
Note: Autoscroll becomes invalid when the label protect mode is set active.
Label mode
(valid only in fanfold setting)
Label mode is designed to prevent continuous forms labels from being peeled from the backing
sheet and becoming jammed in the printer.
When the top edge of the label is positioned at the top of the platen for more than 10 seconds,
the label is automatically repositioned away from the platen. When data is received by the
printer, the labels are automatically fed to the original position before printing begins.
6 AUTO SCROLL
SCROLL:NO
SCROLL:TOF ONLY
SCROLL:ANY POS
37
5. Extended setup options (6-7)
7 LABEL MODE
LABEL MODE: NO
LABEL MODE: YES
.................... Set label protect mode off.
.................... Set label protect mode on.
Platen
Label
Backing Paper