Filter
Top Products
Line feed spacing
One of the line feed spacing options from either 6, 8, or 9 line per inch (LPI) is selected.
When CODE is selected, the line feed spacing can be changed by a software command. When
no line spacing is set in the software command, this value (6 or 8 LPI) is used as a linefeed.
Override bottom margin
This function serves to reduce the bottom margin.
In the standard designation, the bottom margin is set to 17 mm from the bottom edge of the
paper. With this function, data can be printed up to 8mm from the bottom edge of the page.
However, in this case, print quality is not assured due to the restriction of the printer
mechanism.
4 LF PITCH
LF: CODE 6 LPI
LF: CODE 8 LPI
LF: 8 LPI
LF: 9 LPI
36
5. Extended setup options (4-5)
5 OVERRIDE PRINT
OVERRIDE: NO
OVERRIDE: YES
BOTTOM MARGIN
OVERRIDE PRINT
OVERRIDE PRINT
OVERRIDE PRINT
8 mm
17 mm