Filter
Top Products
❏ Vertical alignment mode
The vertical alignment mode serves to compensate for the slippage of the vertical printing
positions, that occurs due to individual differences and age distortion of the printer.
Operation and printing pattern
Before performing the adjustment mode, make sure the ribbon cassette and at least 10-inch
wide paper are properly installed in the printer.
1. Press the SETUP and BIN keys simultaneously while turning ON the printer or pressing the
RESET key. Hold down the both SETUP and BIN keys until the LCD displays
"ALIGNADJUST".
SETUP key + BIN key + Power ON (or RESET key)
2. Seven patterns from +3 to -3 in the mode 0 are printed in accordance with the printing
conditions. The pattern of the present printing condition is printed at position 0 (zero).
3. After the patterns are printed and the friction lever is set to the fanfold setting, the paper is
automatically scrolled. When the friction lever is set to the cut sheet setting, the form feed
operation takes place and the LCD indicates “SELECT GRADE: 0”.
PARK
TOF SET
ENTER
SETUP
M.RLF
LF
M.LF
FF
TEAR
OFFRLF ON LINE
P
.OUT
ON
LINE
POWER
EXIT
BIN
L C D
RESET
Select pattern No.
Set printing conditions
Enter alignment mode
Exit alignment mode
SELECT GRADE: 0
Print mode Character mode family
MODE 0 Draft pica Speed draft (SD), super speed draft (SSD), single
density graphic, double speed/double density
graphic
MODE 1 Draft elite 979-dot graphics
MODE 2 NLQ pica Draft condense (15 CPI, 17.1 CPI, 20 CPI), double
density graphic, quadruple density graphic, 1088-
dot graphic, 1224-dot graphic
MODE 3 NLQ elite 1958-dot graphic
MODE 4 NLQ condensed (20 CPI) NLQ condense (15 CPI, 17.1 CPI, 20 CPI)
61
8. Maintenance (Vertical alignment mode)