•
Apple Macintosh desktop computer, including Macintosh
Quadra,
®
Macintosh Centris,
®
and Power Macintosh
•
Any Apple PowerBook with video-out capability. This includes all
160, 165, 180, and 500 series PowerBooks.
See the following section that applies to your computer.
Connecting to a PC desktop computer
Before beginning, turn off the projector and computer if they are on.
1.
Connect either end of the projector’s video cable to the projector’s
Computer In port.
2. Disconnect the computer’s monitor cable from the VGA port on
the back of the computer, and connect the projector’s video cable
to the computer’s VGA port.
3. Tighten the screws on both connectors to make sure they are
fastened securely.
Connecting to a Computer
7