Filter
Top Products
Connecting to an Audio Source
The projector has two kinds of input for audio: one single-jack input
for your computer and one two-jack input for your video source. The
video source input has an L jack to control the left audio channel and
an R jack to control the right audio channel. If you are connecting to a
video source that has only a single plug, connect it to either the L or
the R Audio In jack.
Connecting audio from a video source (such as a VCR)
Before beginning, turn off the projector and video source if they are
on.
1.
Connect one end of the video/audio cable to the Audio In jacks of
the projector. Insert the white plug into the L Audio In jack and
the red plug into the R Audio In jack.
2. Connect the other end of the video/audio cable to the audio
output jacks of the video source. Connect the white plug to the
left channel and the red plug to the right channel.
16
1 l Installation