Filter
Top Products
Turning the Equipment On and Off
Always turn on the projector and its attached equipment in the
following order:
1.
Video source (such as a VCR), if your video source is not your
computer
2. Audio source (if different from computer or video source)
3. Projector
4. External amplified speaker or PA system (if necessary)
5. Computer.
Remove the projector’s lens cap. Then press the Power button on the
remote control or the projector’s control panel to turn on the
projector. The green power indicator comes on. If computer or video
equipment is attached, the computer or video signal is projected.
Allow about 30 seconds for full illumination.
Warning: Never look into the lens when the lamp is on. This can damage
your eyes. It is especially important that children not look into the lens.
Reverse the steps above to turn off your equipment.
20
2 l Using the Projector