Filter
Top Products
Recalling a setup
Important! Recalling a setup replaces your current projector settings with
the settings that were saved in memory.
Use the Preset button on the control panel to select the memory area
that contains the settings you want to recall.
Clearing a setup
When you don’t want a preset projector setup anymore, you can clear
its memory area. This removes your settings from the memory area and
replaces them with the projector’s default settings. To clear a preset
setup, follow these steps:
1.
Use the Preset button on the control panel to choose the memory
area you want to clear.
2. Hold down the Preset button for approximately 15 seconds. The
status light alternates between flashing and staying lit; when it
remains lit, release the Preset button.
40
3 l Using the Menus