Filter
Top Products
4. Connect the video-out cable to the other side of the Macintosh
adapter on the projector’s video cable.
5. Tighten the screws on all the connectors to make sure they are
fastened securely.
6. Connect the bigger end of the projector’s Macintosh mouse cable
to the projector’s Mouse/Corn port.
7. Disconnect the computer’s mouse cable from the mouse port on
the back of the computer, and connect the smaller end of the
projector’s Macintosh mouse cable to the computer’s mouse port.
8. In the PowerBook’s Display Control Panel, select Mirroring.
Connecting to a Computer
13