Filter
Top Products
2.
3.
For S-Video, insert one end of the S-Video cable into the
projector’s S-Video jack. Insert the other end into the S-video-out
jack of your video source.
If your video source uses a small, round, one-prong composite
(RCA) video connector, you’ll need the video/audio cable that
comes with the ELP-3500. If your video source uses a large,
round, four-prong S-Video connector, you will need to purchase
an S-Video cable.
For composite video, connect the yellow RCA plug on one end of
the video/audio cable to the projector’s Video In jack. Connect
the other yellow RCA plug to the video-out jack of your video
source. (The red and white plugs carry audio. For information
about audio, see page 16.)
S-Video cable
Connecting to a Video Source
15