SPECIAL MODES
5-22
Transparency film with insert sheets
When copying onto transparency film, blank insert sheets can be placed between transparent sheets.
●
This function only operates in "one-sided to one-
sided" and "two-sided to one-sided" modes.
● Multiple copies cannot be selected in this mode.
●
The inserts are inserted under each transparency
as shown at left.
●
Select insert paper that is the same size as the
transparencies.
● When feeding insert paper from an inserter,
copying on the insert paper is not possible.
● Transparencies can be fed from the bypass tray
or tray 3.
●
If the transparencies are loaded in tray 3, be sure
to set the paper size and paper type as explained
on pages 2-10 and 2-11.
1
Load transparency film into the bypass
tray.
Remove any paper
already in the bypass
tray before loading the
transparency film. (To
load paper in the bypass
tray, see pages 2-6 and
2-7.)
2
Touch the [PAPER SELECT] key in the
main screen and select the bypass tray
paper type in the paper setting screen
(touch (X) below).
3
Touch the [TRANSPARENCY] key.
4
Touch the [OK] key.
If the paper size was changed from an AB size to
an inch size, or from an inch size to an AB size, be
sure to set the paper type and size as explained on
steps 5 to 7 on page 2-10 and steps 8 to 10 on
page 2-11.
5
Select the bypass tray.
6
Touch the [TRANSPARENCY INSERTS]
key in the special modes screen (2nd
screen).
The Transparency inserts
setting screen will appear.
The transparency inserts
icon ( , etc.) will also
appear in the upper left
corner of the screen to
indicate that the function
is turned on.
Insert sheets
Example: Inserting insert sheets between transparencies
Originals (1-sided)
Originals (2-sided)
Two-sided originals are
only supported when
automatic document
feeding is used.
Inserts can also be
copied on.
If the transparencies are loaded in tray 3, steps
1 to 5 below are not necessary.
FOR COPY.
AUTO
AUTO
100%
ORIGINAL
PAPER SELECT
COPY RATIO
EXPOSURE
0
PLAIN PLAIN
HEAVY PAPER
PLAIN
PLAIN
2. 8 x11
5. 8 x11
1
/
2
8 x11
1
/
2
1
/
2
(X)
HEAVY PAPER
TYPE.
LETTER HEAD
LABELSPRE-PUNCHED
COLOR
TRANSPARENCY
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
TYPE
NON STANDARD SIZE
OK
SIZE
AUTO-INCH
AUTO-AB
SIZE INPUT
8 X11
A4,B5
TYPE/SIZE SETTING
2/2
1
/
2
AUTO
AUTO
100%
ORIGINAL
PAPER SELECT
COPY RATIO
EXPOSURE
0
N PLAIN
Y
N
PLAIN
5. 8 x11
8 x11
1
/
2
1
/
2
SPECIAL MODES
COVERS/INSERTS
TRANSPARENCY
INSERTS
TAB COPYBOOK COPY