Filter
Top Products
LOADING PAPER
2-5
2
Loading paper in paper tray 5 (optional large capacity tray)
The large capacity tray can hold up to 3,500 sheets of 8-1/2" x 11" size (A4) SHARP standard paper (20 lbs. (80
g/m
2
)). If you wish to change the paper size, please consult your dealer (the paper size must be changed by a service
technician).
1
Pull the tray out until it stops.
When the tray is in
operation, do not use
excessive force to pull
the tray out. This may
damage the tray.
2
Place the paper in the center of the paper
table.
The paper stack must
not be higher than the
indicator line (up to
3,500 sheets of SHARP
standard paper (20 lbs.
(80 g/m
2
))
If the paper type was
changed, be sure to change the appropriate
settings as explained in "Setting the paper type
and paper size" (See page 2-10).
3
Push the tray firmly all the way into the
machine.
The paper table will
automatically rise to the
paper feed position.
Specifications (optional large capacity tray)
Specifications are subject to change for improvement without notice.
Name Large capacity tray (AR-LC6)
Paper size 8-1/2" x 11" (A4)
Paper weight 16 to 28 lbs. (60 to 105 g/m
2
)
Paper capacity (plain) 3500 sheets (20 lbs. (80 /m
2
))
Dimensions
14-23/32" (W) x 21-1/2" (D) x 20-13/32" (H)
(376 mm (W) x 546 mm (D) x 518 mm (H))
Power supply Supplied from the main unit
Weight Approximately 62.9 lbs. (28.5 kg)
Overall dimensions when
attached to machine
53-3/64" (W) x 26-47/64" (D)
(1347 mm (W) x 679 mm (D))