Filter
Top Products
Tax status
• The tax system of your machine has been factory–set to automatic VAT1–6. If you desire to
select any of automatic tax 1–6, manual VAT1–6, manual VAT1, manual tax 1–6, and the
combination of the automatic VAT 1–3 and the automatic tax 4–6, consult your dealer.
• When the combination of the automatic VAT1–3 and automatic tax 4–6 system is selected, one of
the VAT1(G), VAT2(F) and VAT3(E) can be selected in combination with tax 4–6.
Example: BCDEFG= 100100, 110100, 111010
• An EAN not programmed for any of these tax statuses is registered depending on the tax status
of the department which the EAN belongs to.
Delete method
• When you select “delete now”, the programmed data of the EAN code you specified is deleted
with this programming.
• When you select “Delete in X/Z non-accessed EAN deleting job”, you can delete EANs that has
not been accessed during the period that is programmed in the job #2029 with the execution of
EAN deleting job (#105 in Z1 mode).
Programming for EAN code 5012345678900 as follows: A=0, B=0, C=0, D=0, E=0, F=0, G=1,
and H=1.
1. Scan the EAN code and press the
Û
key,
ÄÛ
or enter the EAN code “5012345678900” or
and press the
Û
key twice. 5012345678900
ÛÛ
2. Set the parameters A to H. 00000011
•You can go to the desired position with the
º
or
.
key.
3. Press the
≈
key to program this setting.
≈
4. Press the
;
key to finalize the programming
and generate a programming report.
;
Taxable 1
Delete method
(Inhibit to delete by job#105 in Z1mode)
In case of “delete”, no mark is printed.
When “delete now” is selected:
Print
0.00
P 0.00
P 00000011
P 00000000
ABCDEFGH
Example
25