Filter
Top Products
58
EAN link
* The programed number of link PLUs is shown on the display like “P1”. (Incremented one every time you
program a linked PLU.)
• To program this function, please consult your dealer.
• EAN code and PLU code must have been already defined.
Delete period for non-accessed EAN codes
You can delete the EAN codes which have not been accessed during the period you set in this program when
you execute the job #105 in Z1 mode when you set “Delete in X/Z non-accessed EAN deleting job” in the EAN
delete method (#2010).
* When you select “00” for the period, no EAN code is deleted by the X/Z non-accessed EAN deleting job even
if you programmed “Delete in X/Z non-accessed EAN deleting job” in the job #2010.
2029
.≈
60
;
PrintKey operation
Example
≈;.
Delete period
(1 to 99 days)
2029
To program “00”
Procedure
2029
PGM 2
Linked PLU
2030
.≈
5012345678900
≈
30
:
31
:
32
:
;
PrintKey operation
Example
Note
*To repeat up to 5 times
:≈
Ä
≈
;
.
2030
Cancellation
Scan EAN code
EAN code
(max.13 digits)
Linked PLU
code
Procedure
2030
PGM 2