Filter
Top Products
Setting the Reception Mode
14
Setting the Reception Mode
The machine has the following modes
for receiving incoming faxes:
FAX mode:
Select this mode when you only want to
receive faxes on your line. The machine
automatically answers all calls and
receives incoming faxes.
TEL mode:
This mode is the most convenient for
receiving phone calls. Faxes can also
be received; however, all calls must
first be answered by picking up the
machine's handset or an extension
phone connected to the same line.
TEL/FAX (T/F) mode:
This mode is convenient for receiving
both faxes and voice calls. The
machine answers all calls on a preset
number of rings. If the machine detects
that a call is a voice call (including a
manually dialled fax), it will make a
special ringing sound to alert you to
answer. If the machine detects that the
call is an automatically dialled fax, it will
begin reception.
A.M. () mode (UX-A760 only):
Select this mode when you go out and
want the machine’s answering system
to answer all calls. Voice messages will
be recorded, and fax messages will be
received automatically.
Entering your name
Enter your name in the machine.
♦Your entered name will be printed
automatically at the top of all fax
pages you send.
1 Press , , .
2 Press to select SET.
(To clear your name, press
twice and go to Step 5.)
3 Enter your name by pressing
number keys for each letter as
shown in the chart on page 7. Up to
24 characters can be entered.
• To backspace and clear a mistake,
press on the UX-P710, or
on the UX-A760.
4 Press .
Display:
[DATE&TIME SET]
5 Press to exit.
F
C
START
all.book Page 14 Monday, December 3, 2007 2:10 PM