Filter
Top Products
Messages and Signals
55
9. Trouble-
shooting
FILM END Open the operation panel and the print compartment
cover and check the imaging film (see Replacing the
imaging film on page 9). If the film has completely
wound onto the front spool, replace the film. Otherwise,
make sure the film is loaded correctly and remove any
slack.
KEY LOCK The Key Lock function has been activated. See page
44.
MEMORY IS FULL The memory is full. This may occur during fax reception
if too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional message
will indicate the problem), resolve the problem so that
printing can continue (see page 30).
MESSAGE #
(UX-A760 only)
The indicated number of messages are recorded in the
answering system.
NO # STORED This appears if you attempt to search for an auto-dial
number when none have been stored.
ON HOOK DIAL
The key has been pressed and the fax machine is
waiting for you to dial.
OVER HEAT The print head has overheated. Operation can be
continued after it cools.
PAPER JAMMED A paper jam has occurred. Remove the jam as
explained on page 59.
PRINT HEAD FAIL The print head has failed and requires service.
PRINTER ERROR A printer error has occurred. Try the operation again.
PRINTING The machine is preparing to or printing out a document
from memory.
READY TO SEND A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.
all.book Page 55 Monday, December 3, 2007 2:10 PM