Filter
Top Products
Cleaning the Print Head and Rollers
48
4 Wipe the print head and rollers with
a dry cloth. (If the head is difficult to
clean, try moistening the cloth with
water.)
2 Press the release and open the
print compartment cover.
3 Remove the imaging film from the
compartment, lifting the left ends of
the spools first.
Caution:
• Do not use benzene, thinner, or
other solvents. Avoid touching the
print head with hard objects.
• The print head may be hot if the
machine has just received a large
number of documents. If this is the
case, allow the print head to cool
prior to cleaning.
5 Replace the imaging film:
a. Fit the right ends of the spools
onto the pins.
Press green release
Print head
Rollers
all.book Page 48 Monday, December 3, 2007 2:10 PM