Filter
Top Products
PRODUCT OVERVIEW HARDWARE INSTALLATION
2-2
English
Hardware Installation
This section includes information to help you install the hard drives in the OMNINAS
before you can begin using your storage device.
Removing HDD Trays
The OMNINAS supports up to two 3.5” Serial ATA (SATA) hard drive disks. Follow the
provided guidelines to help you install the hard drives.
First Instance
The following guidelines provide information for first time installation of HDDs, this
also includes a HDD tray under Single, JBOD, and RAID 0 modes.
IMPORTANT:
To prevent data loss or damage to the system, power down your device before
removing a HDD.
1. If your system is not powered down, press the Power button for three (3) sec-
onds until an audible beep sounds and the LED starts to blink.
2. On the bay cover, press in the indicator to open the cover. The cover pops
open.
3. Extend the cover to allow access to the HDD trays.
Opening the HDD Bay Door
21
2 1
21