Filter
Top Products
PRODUCT OVERVIEW CONNECTING TO POWER
2-10
English
1. Set your PC/Laptop’s IP settings to match the network subnet group of the
OMNINAS.
Example:
OMNINAS default subnet settings: 192.254.100. 200
Configure your PC to these settings: 192.254.100. XXX (Whereas xxx repre-
sents a number from 1 to 254, other than 200).
2. Connect one end of the LAN cable to the OMNINAS.
3. Connect the other end to your PC, see following figure.
Connecting to a PC/Laptop
Connecting to Power
1. Connect the power jack to the back of the OMNINAS (DC IN).
LAN
PCLaptop
LAN