Filter
Top Products
PRODUCT OVERVIEW
VII
English
Safety Information
Read the following precautions before setting up a Shuttle Xvision.
Using electrical power
This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Do not allow anything to rest on the power cord. Do not locate this product where
people will walk on the cord.
If an extension cord is used with this product, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.
Do not overload a power outlet, strip or receptacle by plugging in too many devices.
The overall system load must not exceed 80% of the branch circuit rating.
If power strips are used, the load should not exceed 80% of the power strip's input rat-
ing.
Using electrical power
Use the product only with the supplied power supply cord set. If you need to replace
the power cord set, make sure that the new power cord meets the following require-
ments: detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V mini-
mum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.
CAUTION for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to the
power supply unit:
Install the power supply unit before connecting the power cord to the AC power
outlet.
Unplug the power cord before removing the power supply unit from the com-
puter.
If the system has multiple sources of power, disconnect power from the system
by unplugging all power cords from the power supplies.