Filter
Top Products
PRODUCT OVERVIEW CONNECTING WITH THE FINDER UTILITY
2-17
English
Note:
The System Initialization screen only displays if new or unformatted HDDs are
installed.
4. Click Start to begin the initialization process.
The RAID Manager screen displays.
Initialization RAID Manager Screen
5. Select a RAID type, and click Create Disk Array. For further information on
RAID type identification, see RAID Manager.
IMPORTANT:
The initialization process will erase all data from the hard drive.
Make sure that the OMNINAS is connected to a power source and is not pow-
ered down during this process to prevent damage to the system.
6. Click OK to start the RAID build process.
RAID Initialization Startup Screen