Filter
Top Products
PRODUCT OVERVIEW POWERING ON
2-12
English
Powering On
Press to power on. The status LED starts to blink. This process may take 1
to 2 minutes.
Pressing Power Button
A blinking LED specifies that the system is in the powering-on state. A solid LED
specifies that the OMNINAS has obtained an IP address from the router (DHCP con-
nection). See LED Definitions for further information.
In the event of a Red Blinking LED state, the system has failed to obtain an IP
address from the router. The system settings reverts to the default fixed IP address
(169.254.100.200).
Status LED Display During Boot
The HDD LEDs for any installed HDDs also light. See LED Definitions for further infor-
mation.
21