Filter
Top Products
PRODUCT OVERVIEW AUTO MIRRORING
3-21
English
2. Under Formatted Capacity, select a drive and click Format.
Formatting Disk Function
3. A prompt displays to confirm, click OK to continue.
The process continues. When it is complete, the Disk Manager screen displays.
Auto Mirroring
By using RAID 1, you can duplicate data between two hard drives. A minimum of two
HDDs are required for auto mirroring (RAID 1). The Auto Mirror function allows you to
enable or disable the Auto Mirror function available for RAID 1 mode.
A second hard drive must be installed prior to enabling the auto mirroring function.
Note:
Auto mirroring is only available for RAID 1 mode. Depending on the type and
size of HDDs, the rebuilding of your second drive for mirroring may take several
hours. Do not turn off the power or interrupt the system during this process to
prevent damage to the system or your hard drives.
The auto mirroring setup will require the formatting of the new drive. Make sure
you backup all data before starting this process.
To insert a HDD in an empty tray:
1. Power down the system before starting, and remove the empty HDD tray. See
Removing HDD Trays.