Filter
Top Products
PRODUCT OVERVIEW REMOVING HDD TRAYS
2-4
English
RAID 1
The following guidelines provide information for removal of HDDs for RAID 1 mode.
Only RAID 1 supports hot-swap functionality. All other modes require the system to
power down before removal of hard drives.
IMPORTANT:
To maintain RAID 1 data integrity, only remove 1 disk drive. The removal of both
drives may result in data loss or damage to the system.
1. On the bay cover, press in the indicator to open the cover. The cover pops
open.
2. Extend the cover to allow access to the HDD trays.
Opening the HDD Bay Door
3. Press the Removal button (front panel) until an audible beep sounds and the
LED starts to blink. See following figure.
21
2 1
21