Filter
Top Products
2 About Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0
Unifi 45 Projector System Features
The Unifi 45 projector system includes a short throw, high-offset projector for use with your SMART Board 500
series interactive whiteboard, an Extended Control Panel (ECP) and a sturdy support system for classroom
environments. This projector system is easy to install, use, service and upgrade.
When the Unifi 45 projector displays an image from a computer onto your touch-sensitive interactive whiteboard,
you can draw over the image in digital ink using a pen tray pen or your finger. This projector also supports video
and audio connections from a variety of devices, including DVD players, VCRs, document cameras and digital
cameras, and can project media from these sources onto the interactive screen.
The features of the projector system include:
• a wall-mounted, high-offset TDP-SB20 projector
engine that uses DLP® technology by Texas
Instruments® and provides quality Gamma 2.2
correction with Bright, Standard and
True Color modes
• safety-oriented design includes a boom support
with a controlled-collapse feature
• PAL, PAL-B, PAL60, PAL-N, PAL-M, SECAM,
NTSC, NTSC 4.43 video system compatibility
• Composite, S-video and VESA RGB video interface compatibility (with interface support for component
YPbPr/YCbCR input with proper adaptors, not included)
• QVGA, VGA, SVGA, XGA, SXGA, SXGA+, UXGA video format compatibility
• native 1024 × 768 resolution
• serial RS-232 interface for connecting a room control system
• self-protection timer for hot re-strike of projector lamp
• an accessible Extended Control Panel (ECP), which includes the following receptacles: HD-DB15 (RGB)
input, S-video receptacle, composite video jack, stereo 3.5 mm audio input and stereo RCA jacks
• protected cable routing through the projector housing and a cable cover to prevent tampering and clutter
• a secure mounting and installation system that includes:
– optional security screws on the projector plate and an optional lockable ring for the tilt knob
– mounting hardware for solid masonry or hollow framed and masonry wall installations
– templates and instructions for positioning the system in a safe manner