Filter
Top Products
14 Before Installing Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0
Focusing and Aligning the Image
To focus and align the image, project either a computer image, or the projector’s SMART Technologies logo, onto
your SMART Board interactive whiteboard.
If you don’t have a computer connected and you don’t see
the SMART Technologies logo, perform the following steps
to display the logo.
1. Point the remote control at the infrared (IR) sensor on
the front of the projector, as shown, and then press the MENU
button.
2. Press the left and right buttons on the remote to select
Display Settings (third menu from the left).
3. Press the up and down buttons to access the Background
settings.
4. Press the right button to display the Background options.
5. Press the up and down buttons to select Logo.
The SMART logo displays on the screen.
Use the focus adjustment lever to focus the image.
To display the SMART Technologies logo
To focus the image
IR Sensor
Focus
Lever