Filter
Top Products
28 Using Your Interactive Whiteboard System 99-00881-20 A0
Power On
This option enables you to set the Power On setting to Manual (recommended) or Auto. Selecting Auto
automatically starts up the projector when the main power is activated.
Default Setting 2
Projection Mode
This option enables you to choose from various projection positions. The default setting is applied at the factory.
Do not adjust this option unless advised to do so by a certified SMART technical support representative.
Fan Mode
Select Standard for use in environments with elevations of up to 6000' (1829 m). Select High for use
in environments with elevations between 6000' (1829 m) and 9800' (2987 m).
Lamp Power
For reduced energy use and to extend projector lamp life, select Standard. For brighter projection at a higher
power draw that decreases lamp life, select High.
Reset All
This option resets all your projector settings to their factory defaults. Do not adjust this option unless you want
to reset all applied settings, or you are advised to do so by a certified SMART technical support representative.
Status Display
This screen is for reference only. No adjustable options exist in this menu, however you can use it
to troubleshoot problems with your system.
Input
This field shows your current active input setting: Computer 1, Computer 2, S-video or Composite.
Mode Name
This field shows the name of your current display mode.
Resolution
This field shows your current display resolution.
Frequency
This field shows your current refresh rate frequency.
Sync
This field shows your current synchronization rate.
Lamp Time
This field shows your projector lamp’s operating time since installation.