Filter
Top Products
ii Important Information 99-00881-20 A0
Safety Warnings
WARNING
• Failure to follow the installation instructions included in this manual and other guides
packaged with your Unifi 45 projector retrofit kit could result in personal injury or damage
to the product.
• Two people are required to mount the projector and the interactive whiteboard on a wall
because they might be too heavy for one person to maneuver onto their wall-mounting
brackets.
• When mounting the projector on a framed wall, you must attach both the mounting bracket
and safety tether to a stud to safely support the projector’s weight. If you use only drywall
anchors, the drywall can fail, resulting in product damage and possible personal injury.
• Do not remove any screws other than those specified in the lamp replacement instructions.
• If the two screws supporting the safety strap are removed, the projector boom will be free
to swing. Make sure that these two screws are tightened and never remove them
from the unit without supporting the projector boom first.
• To reduce the risk of fire or electric shock, do not expose any component of your
SMART Board interactive whiteboard system to rain or moisture.
• Do not climb (or allow children to climb) on any part
of your wall-mounted SMART Board interactive
whiteboard system.
• Do not climb on, hang from or suspend objects from
the Unifi 45 projector’s arm.
• Climbing on the interactive whiteboard or projector arm
could result in personal injury or product damage.
• Do not stare into the beam of light created by the
projector. Instruct children not to look in the direction of,
or stare at, this beam of light. Encourage users to keep
their back to the projector when working at the interactive
whiteboard. Before they turn to face the audience,
users should step sideways, out of the projector’s beam.
• Do not touch the head or lens of the projector because it can become extremely hot
during normal operation.
• Cleaning a boom-mounted projector might result in a fall and injury.
• Do not attempt to service the projector other than performing routine lamp replacement
and cleaning the mirror. Service should be performed only by an authorized service provider.
Other than the lamp module, there are no user serviceable parts inside the unit.
• If the projector is mounted on the boom, the manufacturer recommends contacting
your authorized SMART reseller when the lamp must be exchanged.
• Only qualified personnel should replace the projector lamp. Replacing the lamp
in a boom-mounted projector might result in fall and injury.
• If you continue to use the projector after the replacement message appears, the lamp
might shatter or burst, scattering glass throughout the projector head.