Filter
Top Products
Installing your audio system
Your SBA-L projection audio system comes with two SBA-L speakers and mounting brackets. Your
audio system also includes a switching power supply and the cabling required to connect your audio
system to your interactive whiteboard and projector.
Before you connect the audio system to the projector, you must install the speaker brackets,
speakers and speaker cable clips. Mount the speakers directly to your interactive whiteboard.
Connect the speakers to the projector connection panel using the dual-channel (left and right) RCA
plug-to-3.5 mm phone connector cable included with the speakers.
To learn how to install your audio system, see the SBA-L Projection Audio System installation guide
(smarttech.com/kb/142552).
Routing the cables
When connecting cables from the SMARTUX60 projector to your interactive whiteboard, make sure
that all cables pass between the two interactive whiteboard wall-mounting brackets. Make sure the
cables don’t rest on the wall-mounting brackets.
Using SMART software
Your SMARTBoard800ixe-SMP interactive whiteboard system with appliance comes with software
installed including SMARTProductDrivers and the SMARTMeetingPro application.
You can download other SMART software from smarttech.com/software to your laptop. These pages
list the minimum hardware requirements for each software version and have upgrades to your laptop
software to ensure compatibility.
C HA PTER 2
Installing your interactivewhiteboardsystem
12