Filter
Top Products
Command Command target range Response
set language [target] =Chinese (Simplified)
=Chinese (Traditional)
=Czech
=Danish
=Dutch
=English
=Finnish
=French
=German
=Greek
=Italian
=Japanese
=Korean
=Norwegian
=Polish
=Portuguese (Brazil)
=Portuguese (Portugal)
=Russian
=Spanish
=Swedish
language=[target]
set groupname [description] Enter a descriptor no more
than 12 characters long.
groupname=[description]
set projectorname [description] Enter adescriptor no more
than 12 characters long.
projectorname=[description]
set locationinfo [description] Enter a descriptor no more
than 16 characters long.
locationinfo=[description]
set contactinfo [description] Enter a descriptor no more
than 16 characters long.
contactinfo=[description]
set videomute [target] =on
=off
videomute=[target]
These commands control the current system settings. These commands are available when the
projector is in Standby mode and when it is on.
Command Command target range Response
set restoredefaults [none] restoredefaults=done
set lamphrs [target] =0 lamphrs=0
set vgaoutnetenable [target] =on
=off
vgaoutnetenable=[target]
A PPEND IX B
Remotelymanagingyour systemthrough anRS-232serialinterface
89