Filter
Top Products
48
Assigning names to MDs
Assigning disc or track names
Before you begin
• Only alphanumeric characters and the symbols listed below can be
used in disc and track names:
! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ ‘
All other characters will not be correctly displayed.
• Disc or track names cannot be recorded or edited on a write-
protected MD. To do so, first slide the write-protect tab on the MD
to enable writing.
1 Open the MD window (page 14).
2 Click the MD (in the Function Tree display) that you want to name,
and then click the Disk Information display.
To assign a name to a track, click the track name of the track in the
Track Name display.
The edit mode for entering the name is activated.
3 Input the name.
Right-clicking in the edit mode opens up a pop-up menu that lets
you copy and paste previously entered text data.
4 Press the ENTER key.
The name that you typed in is entered and the system becomes
ready for input of the next name.
Note
Disc and track names are saved to both the MD and your computer’s hard disk.
If you modify the name of a track on the system stereo component, the track
name may no longer match the one displayed in M-crew. To correctly display
track names that have been modified on the MD, click the Reload button in the
MD window (page 15).