Sony PCLK-MN10A Network Card User Manual


 
Performing MD operations
81
To place the images automatically
Select the images and click “Autocopy” in the “Edit” menu.
The images are pasted into the template area without changing the
aspect ratio.
To make the image round or square
Select the image in the label creation area and click “Round” or
“Square” in the “Edit” menu.
You can change the size of an image in the label creation area but
not in the template area.
To rotate the image 90 degrees
Select the image in the label creation area and click “Rotate” in the
“Edit” menu.
To change the size of the image
Select the image and drag the frame.
To change the size without changing the aspect ratio, drag the
image while holding down the SHIFT key.
To switch the positions of overlapping images or texts
Select the image or text in the label creation area, and then click
“Front” or “Back” in the “Overlap” menu to bring the selected
image or text to the front or move it to the back.
To realign multiple images
Select images while pressing down the SHIFT key, or drag the
images you want to realign, and then click “Align,” “Display
Evenly,” “Condense,” or “Expand.”
If you selected “Align,” click the type of alignment from among
“Align to Left,” “Align to Right,” “Align to Top,” “Align to
Bottom,” “Align to Center [Vertical],” and “Align to Center
[Horizontal].”
If you selected “Display Evenly,” “Condense,” or “Expand,” select
the orientation by clicking “Vertical” or “Horizontal.”
(continued)