Filter
Top Products
Performing MD operations
67
Combining tracks
You can combine two tracks into one track.
Note
While this dialog box is displayed, the MD cannot be operated by the system
stereo component.
1 Open the MD window (page 14).
2 Select two tracks you want to combine from the MD window.
Click the track number of the first track, and then click the track
number of the second track while holding down the CTRL key.
Notes
• If you select the first track only, and then proceed to step 3, the system
assumes the second track to be that which immediately follows.
• You cannot select and combine three or more tracks.
• You cannot combine tracks recorded in different recording modes.
3 Click the MD edit button .
The “Combine” dialog box appears.
Rehearsal playback is performed for about 4 seconds of a segment
consisting of the last 2 seconds or so of the first track and the first 2
seconds or so of the second track.
To cancel the combination, click .
(continued)