Filter
Top Products
Performing MD operations
59
Recording from the tuner to an MD
When you record from the tuner to an MD, M-crew enters the manual
recording mode automatically. You cannot select synchro recording
mode.
Before you begin
• You cannot record to a write-protected MD. Slide the write-protect
tab on the MD to enable writing.
• Before you begin the recording, double-click the disc icons of all the
MDs to be recorded to. This will cause the system to upload TOC
information necessary for the recording operation.
1 Open the Rec window (page 34).
2 Click TUNER in the Function Tree display on the left.
3 Use the TUNER window to tune in the radio broadcast that you
want to record to the MD. (page 87).
4 Click the destination MD in the Function Tree display in the MD
window.
5 Click the REC button in the Rec window.
The MD enters recording-pause mode.
6 Click in the MD window.
Recording from the tuner to the MD starts.
To stop recording, click
in the MD window.
Recording by drag-and-drop operation
1 Open the Rec window (page 34).
2 Click TUNER in the Function Tree display.
3 Drag the station name from the TUNER window and drop it onto
the destination MD in the MD window.
4 Click
in the MD window.
(continued)