Filter
Top Products
62
Recording to an MD from other audio sources
Before you begin
• You cannot record to a write-protected MD. Slide the write-protect
tab on the MD to enable writing.
• Before you begin the recording, double-click the disc icons of all the
MDs to be recorded to. This will cause the system to upload TOC
information necessary for the recording operation.
1 Open the Rec window (page 34).
2 Click the Manual button (page 35).
3 Click the desired function (audio source) in the Function Tree
display you want to record from.
4 Click the REC button in the Rec window.
MD recorder changes to record-pause mode.
5 Start playing the source you want to record.
6 Click or the Fader button in the MD window.
Recording from the selected source to the MD starts.
To start recording with the fade-in effect, click the Fader button.
To stop recording, click
in the MD window.
If you click the Fader button, the fade-out effect is recorded and the
MD recorder changes to record-pause mode.