Filter
Top Products
21
GB
D:\SDM\n80\N80GB\001009\3868361251\386836125SDMN50AEP\02GB-
SDMN50AEP\01GB02BAS-AEP.fm
masterpage:Right
SDM-N80
4-082-671-12(1)
Automatic brightness adjustment function (light sensor)
Thismonitoris providedwitha featureto automaticallyadjustthe
screen brightnessaccordingto the brightnessof thesurroundings.
Thebrightnessof the backlight issetto themost appropriate level
by setting the light sensor to ON. The default setting of the
brightness of the backlight is set to its maximum. When the light
sensor setting is set to ON, the monitor adjusts the brightness of
the backlightlinearly fromits lower- toupper-limitvalues. When
the user adjusts the backlight, the backlight brightness is
automaticallyadjusted betweenthe useradjustment valueand the
upper- and lower-limit values.
Automatic picture quality adjustment function (Analog RGB signals only)
When the monitor receives an input signal, the automatic picture
quality adjustment function of this monitor adjusts the picture
position, phase, and pitch to provide a high quality picture at the
center of the screen.
Additionally, several factory preset modes are stored in the
monitor’s memory as recommended adjustment data. (See the
Appendix for a list of the factory preset modes.)
Even when a signal that matches one of the factory preset modes
is input, if it is input for the first time, the automatic picture
quality adjustment function works to optimize the picture quality
according to the type of devices connected.
Also, when a signal that does not match any of the preset modes
is input for the first time, the function works and ensures that a
clear picture appears on the screen for any timing within the
monitor’s frequency range (horizontal: 28 – 92 kHz, vertical: 48
– 85 Hz).
Notes
• The automatic picture quality adjustment function may not work
properly depending on the typeof signal input.
• For any signal input for the first time, the automatic picture quality
adjustmentfunction worksand themonitor willtake alongertime than
normal for displaying the picture.
• While the automatic picture qualityadjustment function is activated,
only the
1 (power) switch will operate.
• While the automatic picture qualityadjustment function is activated,
AUTO ADJUSTING appears on the screen.
User-specified
brightness value
Backlight brightness
Maximum
User adjustment value
Minimum
Automatic brightness adjustment
after user adjustment
Preset automatic adjustment
Brightness of surroundings
Brightnessduring
user adjustment
01GB01COV-AEP.book Page 21 Monday, July 16, 2001 2:22 PM