Filter
Top Products
85
nN
Connecting peripheral devices
VGN-T series
To attach your computer to the port replicator, proceed as follows:
1 Disconnect all peripherals from the computer.
2 Plug the power cord (1) into the AC adapter and an AC outlet.
3 Plug the cable attached to the AC adapter (2) into the DC In port (3) on the port replicator (4).
4 Remove the cover from the port replicator connector on the bottom of your computer.
!
Your computer comes with the cover attached to the port replicator connector. When you remove the cover to use the port replicator, make sure to keep the cover
at hand.