Filter
Top Products
14
Remote control
Remote control
Laser pointer
This remote control has a laser pointer in place of a finger or rod. The laser beam
works and the
LASER INDICATOR lights while the LASER button is pressed.
►The laser pointer of the remote control is used in place of
a finger or rod. Never look directly into the laser beam outlet or point the laser
beam at other people. The laser beam can cause vision problems.
WARNING
►Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
CAUTION
Installing the batteries
Please insert the batteries before using the remote control. If the remote control starts to
malfunction, replace the batteries. If you will not use the remote control for an extended
period, remove the batteries from the remote control and store them in a safe place.
1.
Slide back and remove the
battery cover in the direction
of the arrow.
2.
Align and insert the two AA batteries
(HITACHI MAXELL, Part No.LR6
or R6P) according to their plus and minus terminals as indicated in the remote control.
3.
Replace the battery cover in the direction of the arrow and snap it back into place.
►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
WARNING
BLANK
LASER
ASPECT
PUSH
ENTER
PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON VIDEO
RGB
PAGE DOWN
ESC MENU
RESET
POSITION AUTO
MAGNIFY
ON
OFF
MY BUTTON
1
2
VOLUME
+
-
FREEZE KEYSTONE
MUTE
LASER INDICATOR
LASER button
C A U T I O N
LASER RADIATION-
DO NOT STARE INTO BEAM
MAX. OUTPUT: 1mW
WAVE LENGTH: 650nm
CLASS2 LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS2 LASER PRODUCT
MAX OUTPUT : 1mw
WAVE LENGTH : 650nm
IEC60825-1 :2007 EN60825-1:2007
䊎䊷䊛䉕䈱䈡䈐䈖䉁䈭䈇䈪䈒䈣䈘䈇䇯
ᦨᄢജ䇭㩷䇭䋱䌭㪮
ᵄ㐳䇭㩷㩷㩷䇭䋶䋵䋰
㩷
㫅
㩷
㫄
䉪䊤䉴䋲䊧䊷䉱ຠ
JIS C 6802:2005
IEC60825-1:2007
EN60825-1:2007
[Class2 Laser Product] Wavelength: 650nm, Maximum Output: 1mW, No beam divergence
[Laser Diode] Wavelength: 650nm, Maximum Output: 6mW, Beam divergence: 30deg(perpendicular) / 8deg(parallel)