Filter
Top Products
62
MIU menu
MIU menu (continued)
Item Description
MY IMAGE
Selecting this item displays the MY IMAGE
menu.
Insert the SD memory card or USB memory into the
projector before you use the MY IMAGE function
(
12).
The application software “PJTransfer” is
required to store image(s) into the projector.
Use the
▲/▼
buttons to select an item which is a still image by the MY IMAGE
(
MY IMAGE (Still Image Transfer) Display of the User’s Manual -
Network Guide) and the ► or
ENTER
button to display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or
ESC button on the remote control.
To erase the image displayed and its source file in the SD
memory card or USB memory
(1) Press the
RESET button on the
remote control while displaying an
image to display the MY IMAGE -
RESET menu.
(2) Press the
ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
To stop erasing, press the
ESC button on the remote control or
the ◄ button on the projector.
(continued on next page)