Filter
Top Products
56
MIU menu
MIU menu (continued)
(continued on next page)
Item Description
LIVE MODE
SETTING
(continued)
MULTI
PC
MODE
The projector supports the Single PC mode
that displays an image on full screen sent by
1 PC, and the Multi PC mode that divides the
screen into 4 zone and displays images in
each zone sent by up to 4 PCs. The MULTI
PC MODE function switches these modes.
SINGLE
Use the ▲/▼ buttons to select an item, and the
ENTER
or
INPUT button to perform the item. The mode will be
switched from the Multi PC mode to the Single PC mode
and the quarter screen identified in the menu will be
displayed on full screen.
MULTI
Use the
ENTER or INPUT button to perform the item.
The mode will be switched to the Multi PC mode and the
screen will be divided to 4 zones.
• If the Presenter Mode is set to on in the PC whose
image is currently displayed on screen, a message,
QUIT PRESENTER MODE, will be displayed in about 3
seconds when the function is performed.
• The function is available when there is any PC
connected to the projector in the Multi PC mode set in
the "Live Viewer 3" software.
DISPLAY
USER
NAME
Selecting this item displays the Display User Name
defined in the "Live Viewer 3" software in the PC whose
image is on screen.
SINGLE PC mode
The Display User Name will be
shown in the DISPLAY USER NAME box.
Examples
Display User name Shown in the DISPLAY USER
NAME box
PC_NAME0001 PC_NAME0001
(remained as default) Unnamed
(blank space)
(prohibited showing) (Anonymous)
If there is no PC in the Single PC
mode connected to the projector,
the DISPLAY USER NAME box is shown as right.
MULTI PC mode
The Display User Names will be
shown in the DISPLAY USER
NAME box.
• See the
User’s Manual – Network Guide for details
of the Display User Name setting.