Filter
Top Products
51
OPTION menu
OPTION menu (continued)
Item Description
SECURITY
(continued)
3. Using the PIN LOCK Function
PIN LOCK is a function which prevents the projector from being used unless
a registered Code is input.
3.1 Registering the PIN Code
3.1-1 Use the ▲/▼ buttons on the SECURITY menu
to select PIN LOCK and press the ► button
or the
ENTER button to display the PIN LOCK
on/off menu.
3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off
menu to select TURN ON and the PIN BOX
will be displayed.
3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►,
RGB and INPUT buttons.
The PIN CODE AGAIN BOX will appear.
Reenter the same PIN Code. This will
complete the PIN Code registration.
•
If there is no key input for about 55 seconds while
the PIN BOX or the PIN CODE AGAIN BOX is
displayed, the menu will close. If necessary, repeat
the process from 3.1-1.
Afterwards, anytime the projector is restarted after
the power switch is turned off the PIN BOX will be
displayed. Enter the registered PIN Code.
The projector can be used after entering the
registered PIN Code. If an incorrect PIN Code is
input, the PIN BOX will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn off.
Afterwards the projector will turn off every time an incorrect PIN Code is
input. The projector will also turn off if there is no key input for about 5
minutes while the PIN BOX is displayed.
This function will activate only when the projector is started after the power
switch was turned off.
•
Please do not forget your PIN Code.
3.2 Turning Off the PIN LOCK Function
3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu.
Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be
displayed.
Enter the registered PIN Code to turn the PIN LOCK function off.
If an incorrect PASSWORD is input 3 times, the menu will close.
3.3 If you have forgotten your PIN Code
3.3-1 While the PIN BOX is displayed, press and
hold the
RESET button for three seconds
or press and hold the
INPUT button for 3
seconds while pressing the ► button on the
projector.
The 10 digit Inquiring Code will be displayed.
•
If there is no key input for about 5 minutes while the Inquiring Code is
displayed, the projector will turn off.
3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
(continued on next page)