SRS Labs CP-X809 Projector User Manual


 
49
OPTION menu
OPTION menu (continued)
Item Description
SECURITY
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1 Use the ▲/▼ buttons on the OPTION
menu to select SECURITY and press the ►
button. The ENTER PASSWORD box will be
displayed. The factory default PASSWORD is
2600. This PASSWORD can be changed (1.2
Changing the PASSWORD).
• It is strongly recommended the factory default
PASSWORD to be changed as soon as possible.
1.1-2 Use the ▲/▼/◄/► buttons to enter the
registered PASSWORD. Move the cursor to
the right side of the ENTER PASSWORD
BOX and press the ► button to display the
SECURITY menu.
• If an incorrect PASSWORD is input, the ENTER PASSWORD BOX will
be displayed again. If incorrect PASSWORD is input 3 times, the projector
will turn off. Afterwards the projector will turn off every time an incorrect
PASSWORD is input.
1.2 Changing the PASSWORD
1.2-1 Use the ▲/▼ buttons on the SECURITY menu
to select SECURITY PASSWORD CHANGE
and press the ► button to display the ENTER
NEW PASSWORD BOX.
1.2-2 Use the ▲/▼/◄/► buttons to enter the new
PASSWORD.
1.2-3 Move the cursor to the right side of the
ENTER NEW PASSWORD BOX and press
the ► button to display the NEW PASSWORD
AGAIN BOX, enter the same PASSWORD
again.
1.2-4
Move the cursor to the right side of the NEW
PASSWORD AGAIN BOX and press the ►
button and the NOTE NEW PASSWORD BOX
will be displayed for about 20 seconds, please
make note of the PASSWORD during this time.
Pressing the ENTER button on the remote control or INPUT button on
the projector will close the NOTE NEW PASSWORD BOX.
• Please do not forget your PASSWORD.
1.3 If you have forgotten your PASSWORD
1.3-1
Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX.
1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the
RESET button on the remote control for about 3 seconds or press and
hold the
INPUT button for 3 seconds while pressing the ► button on
the projector.
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while the Inquiring Code is
displayed, the menu will close. If necessary, repeat the process from 1.3-1.
1.3-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD
will be sent after your user registration information is confirmed.
(continued on next page)