Filter
Top Products
63
MIU menu
MIU menu (continued)
Item Description
INFORMATION
Selecting this item displays the MIU-INFORMATION- dialog for confirming
the network settings.
• The PROJECTOR NAME is displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID” field
until you setup those items. (
63, 64)
• When the voltage level of the battery for the built in clock decreases, the
set time may become incorrect even though accurate date and time are
input. Replace the battery suitably. (
71)
• MAC wireless will not be displayed when the NETWORK MODE is set to
the WIRED even if the wireless network card is mounted.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate “0.0.0.0”
in the following condition.
(1) The NETWORK MODE is set to the WIRELESS and the wireless
network card is not mounted.
(2) DHCP is ON and the projector does not get address from DHCP server.
• Nothing (blank) is shown in the “CH”, “SPEED” and “MAC WIRELESS”
field in case of either no wireless network card is inserted or “WIRED” mode
is selected at NETWORK MODE, or both.
• The actual performance and setting will be shown in the “CH ” and “SPEED”
field, instead of the setting value in the SETUP menu.
SERVICE
Selecting this item displays the SERVICE menu.
Use the ▲/▼ buttons to select an item, and the
► or
ENTER button on the remote control to
perform the item.
MIU RESTART
Use the ▲ button to restart the network communication. The network
communication will be cut off once and restarted.
EXECUTE
CANCEL
• After selecting the EXECUTE, the MIU menu may not be controlled
approximately 20 seconds.
• If DHCP is ON, IP address may be changed.