Filter
Top Products
SSI
EPS2U Power Supply Design Guide, V2.1
4 Mechanical Overview
STATUS
Required (Optional)
Note: Some enclosure features are noted as optional in the drawing below. These features may be use in some
chassis designs where only top access is allowed for the cage mounting.
The EPS2U is a power supply enclosure intended to handle a power range of 400W to 700W. A mechanical
drawing of the power supply cage is shown below in Figure 1.
A
llow for 1.2mm
protrusion (x4)
Optional mounting features for top access
mounting of the power supply.
Figure 1: Enclosure Drawing
- 7 -