Filter
Top Products
Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
SMSC LAN9420/LAN9420i 127 Revision 1.22 (09-25-08)
DATASHEET
4.4.6 MII Access Register (MII_ACCESS)
This register is used to control the management cycles to the internal PHY.
Offset: 0094h Size: 32 bits
BITS DESCRIPTION TYPE DEFAULT
31-16 RESERVED RO -
15-11 PHY Address
For every access to this register, this field must be set to 00001b.
R/W 00000b
10-6 MII Register Index (MIIRINDA)
These bits select the desired MII register in the PHY.
R/W 00000b
5-2 RESERVED RO -
1 MII Write (MIIWnR)
Setting this bit tells the PHY that this will be a write operation using the MII
data register. If this bit is not set, this will be a read operation, packing the
data in the MII data register.
R/W 0b
0 MII Busy (MIIBZY)
This bit must be polled to determine when the MII register access is
complete. This bit must read a logical 0 before writing to this register or to
the MII data register. The LAN driver software must set (1) this bit in order
for the Host system to read or write any of the MII PHY registers.
During a MII register access, this bit will be set, signifying a read or write
access is in progress. The MII data register must be kept valid until the
MAC clears this bit during a PHY write operation. The MII data register is
invalid until the MAC has cleared this bit during a PHY read operation.
R/W/SC 0b