Filter
Top Products
17
❏ Open the covers of both tractors and insert the
paper so the tractor pins fit into the holes of the
paper.
❏ Close the tractor covers and make final
adjustments to the paper position by moving the
tractors. The paper should lie flat with no
buckling or bulging (tractors too close) or
stretching or elongating the holes (tractors too far
apart). After making these adjustments, be sure
that you re-lock the tractors by pulling the gray
levers into the locked position.
❏ Close the rear cover and press down gently on it
until it locks into place with a click.
Note:
If you removed the rear cover, first insert its two tabs
into the holes provided in the back of the printer and
then swing it closed.
Volet de tracteur
Stachelwalzenhalter
Coperchio trattore
Clamp lever
Levier de verrouillage
Klemmhebel
Leva di blocco