Star Micronics XR-1520 Printer User Manual


 
.
If you press this button while on-line, this will alternately flash the QUIET
indicator. When in Quiet mode with the QUIET indicator lit, the printer will
print slightly slower, but at a reduced noise level.
SET/EJECT/PARK button
NOTE: This button has no effect if the bottom feed mode is selected.
Pressing this button causes the printer to begin paper loading if the paper has
not loaded while in the off-line state.
If the paper has been loaded, this button results in different functions
depending on the position of the release lever.
If the release lever is back for the fanfold forms, pressing this button parks
the forms.
If the release lever is forward for the single sheets, pressing this button ejects
the paper.
PITCH button
This button allows you to select the printing pitch. Remember that the printer
must be off-line for you to do this. Successive presses of this button will
illuminate (and select) the following options in order (Note that condensed
elite is not available in the IBM mode):
Pitch
Pica (1oCPI)
Elite (120
Condensed pica ( 17CPI)
Condensed elite(2OCPI)
Proportional
.
. .
k..
.
43