Filter
Top Products
VERTICAL POSITION COMMANDS
Set line spacing to l/8 inch
[Model ASCII
I Decimal
I Hexadecimal 1
1 Both I cE!K> “0’
1 27 46
1 1B 30
I
Sets the distance the paper advances or reverses in subsequent line
feeds to l/8 inch.
Set line spacing to 7/72 inch
Mode ASCII
Decimal Hexadecimal
Both <BSc> “1”
27 49 1B 31
Sets the distance the paper advances or reverses in subsequent line
feeds to 7/72 inch.
Set line spacing to l/6 inch
Mode ASCII Decimal
Hexadecimal
Std. &SC> “T 27 50
18 32
Sets the distance the paper advances or reverses in subsequent line
feeds to l/6 inch.
Set line spacing to n/216 inch
Mode ASCII Decimal Hexadecimal
Both <ESC> “3” n 27 51 n 1B 33 n
Sets the distance the paper advances or reverses in subsequent line
feeds to n/2 16 inch, where n is between 0 and 255. If n = 0, in
Standard mode the line-feed distance is set to 0, but in IBM mode this
command is ignored.
79